Skip to content
Gearsensor for Bafang Mid Drives-Voltaire Cycles

Gearsensor for Bafang Mid Drives

by Bafang
Sold out
$54.96 - $54.96
$54.96
$54.96 - $54.96
$54.96

Gearsensor for Bafang Mid Drives

  • Intelligent sensor that will power down or shut off the motor during shifting to avoid chain grinding and cassette breaking
  • Extend the life of your gears indefinitely with the gearsensor
  • An absolute must for mid-drives
  • Made for both derailleurs and internally geared hubs

The Gearsensor acts like a speed shifter so you are able to shift your bike at full throttle and barely fill the throttle cut off.

It will make your BBS02 or BBSHD shift faster, smoother and safer.

The Gearsensor is plug and play with any BBS02 or BBSHD in place of one of your ebrakes and is a 15 minute install.

If you install it with the LunaCycle edition of BBS02 or BBSHD (the ones with the luna cycle logo engraved on the side) the controller has a separate ebrake connector so you can use both ebrakes and the gear sensor. If you go with this setup the shifting power delay is much shorter than using the ebrake connector.

However the gear sensor will work with all bafang mid drives by simply connecting it to one of the ebrake cut off switches. It will also work with any mid drive equipped with an ebrake cut off as long as the user can rewire it to fit their ebrakes.

Note: Rohloff and Nuvinci IGH must use the Derailleur version, the Shimano, S-A, Nexus, Sram uses the IGH version